November 2008
Monthly Archive
Furnace & Air ConnectionStay Cool & Toasty! |
Monthly Archive
Did you know that the quality of the indoor air you breathe has a direct negative impact on your cardiovascular system? Read more about the link between IAQ and cardiovascular disease as well as what you can do to protect yourself and your family.
The Background of the Research
In the study, a team of researchers from Sweden and Denmark looked at the affect of tiny particles on endothelial cells. Endothelial cells line the interior surfaces of all blood vessels as well as the heart, and support blood flow by performing a number of important functions including reducing friction (and thereby reducing the work load on your heart). A reduction in the Microvascular Function (MVF) of endothelial cells through inflammation or other types of stresses can lead to a number of cardiovascular diseases including atherosclerosis.
The study was a randomized, double blind study performed on 21 nonsmoking couples aged 60 to 75. All participants were in good health and all lived near busy roads meaning that they were routinely exposed to road dust as well as auto and diesel exhaust. The couples were studied in their homes and were randomly selected to be exposed to filtered air followed by non-filtered air, or the other way around while the researchers measured the amount and chemical properties of the particles in the air. After every test, the Microvascular Function (MVF) of each individual was measured.
Why study "tiny particles?" Because a significant portion of air pollution is made up of "particulates," tiny particles that are found in auto and diesel exhaust, cigarette or other types of smoke, and industrial stack emissions. These tiny particles are microscopic in size and are easily inhaled into the lungs where they enter the blood stream and contact the endothelial lining.
The Results and Conclusions
Once the investigation was concluded, some of the more significant results showed that:
- Filtering the indoor air improved MVF by more than 8%. This is pretty significant and is something any of us can achieve by following some of the recommendations listed below.
- The diameter of the airborne particles and their mass, had a greater effect than their total number concentration. In other words, the smallest particulates (smaller than 2.5 micrometers) were the biggest hazard, mainly because these particles are too small to be caught by the body’s natural defense systems and can easily enter the lungs and blood stream.
- MVF was also significantly linked to being exposed to airborne particulates containing iron, potassium, copper, zinc, arsenic, and lead. This is important to those of us that happen to live near industrial or manufacturing plants.
Based on their results, the researchers concluded that, "Reduction of particle exposure by filtration of recirculated indoor air for only 48 hours improved MVF in healthy elderly citizens, suggesting that this may be a feasible way of reducing the risk of cardiovascular disease."
The Limits of the Study
It’s significant to note some of the limits of the study in order to get a more balanced view of the results. First, note that all of the participants were in an age group (60 to 75) that is particularly susceptible to respiratory and cardiovascular disease to begin with. However, this does not mean that everyone else is immune.
According to the US EPA, the people that are most at risk from particles, mold, or other respirable hazards include:
1. Young children and babies (their respiratory and immune system is still developing)
2. The elderly (their respiratory and immune system is not as efficient as it used to be)
3. The sick or immune compromised (their respiratory and immune system is already under attack)
4. People with underlying respiratory disease such as asthma or severe allergies.
Secondly, this study only looked at the effect of airborne particles on the cardiovascular system so it was a very narrow study. The study did not include other common factors that also affect Indoor Air Quality such as allergens, dust, pet dander, dust mites, mold, temperature and humidity, to name a few.
What You Can Do
Although it’s true that this particular investigation focused on the elderly (aged 60 to 75), I personally believe that the results apply to all of us to some extent or another. The extent that you are affected by airborne particles is going to depend on your age, your genetic makeup, your over all health and fitness level, your work and living conditions, and so on. Most of these you can’t do anything about. However, there is one factor you have some degree of control over: the amount of particulates in your home. Fortunately, there are a number of easy ways to reduce the amount of particles floating around in your indoor air.
Reducing Airborne Particles in Your Home
A couple of easy ways to reduce the amount of particles in your indoor air include:
1. Reduce airborne particles by cleaning often. Purchase or make sure you have a vacuum with a HEPA filter on the exhaust. "HEPA" is a type of filter (not a brand name) and it stands for "High Efficiency Particulate Air." A HEPA filter will filter out a minimum of 99.97% of all particles 0.3 micros or larger. If you use a vacuum without a HEPA filter, all you’re doing is recirculating small particles in the air instead of actually removing them.
2. Change and/or Upgrade the filters on your HVAC. Your HVAC filters are your front-line defense in removing particles from the air inside your home. The US EPA recommends using a filter with at least a MERV 8 rating. "MERV’ stands for "Minimum Efficiency Reporting Value" as determined by the American Society of Heating, Refrigeration and Air Conditioning Engineers. I personally recommend filters with a MERV 11 but only if you have a relatively new HVAC unit (less than 10 years old). You’ll pay more but they’ll remove smaller particles from the air. If you have an older or less powerful HVAC unit, then a MERV 8 should suffice. In either case, change the filters according to the manufacturers recommendations (or more frequently if you live in a dusty area).
3. Consider reducing the amount of installed carpeting in your home and replacing it with wood or tile flooring. In the Indoor Air Quality business, installed carpeting is known as a "pollutant sink." The carpet fibers trap all kinds of dirt and gunk which it then releases back into the air every time it’s disturbed. If you’ve ever pulled up old carpet, you were probably surprised (and disgusted) at how much dirt was underneath - even though you vacuum on a regular basis. Wood or tile floors are much easier to keep clean and you can still use the occasional throw rug.
4. Purchase an air purifier for the bedroom(s). Where do you spend 7 to 9 hours of your time per night? In the bedroom. Consider purchasing a high quality air purifier for your bedroom(s). I recommend (and own) the purifiers distributed by Nikken, Inc. A word of warning though, they’re pretty expensive but they’re the best I’ve found. They’re only sold by "Wellness Consultants" (email me for the one I use). Regardless of where or what kind of air purifier you buy, make absolutely sure that it does not produce ozone. Ozone is a toxic gas that can cause a number of health problems (see EPA warning at the EPA website listed below). You’re trying to reduce indoor pollutants, not add to them.
Finally, remember that there is no "magic bullet" when it comes to improving Indoor Air Quality. However, the steps mentioned here will go a long ways towards reducing the number of particles in your home or office and reducing your risk of cardiovascular disease.
Sources
For the full article, see "Indoor Particles Affect Vascular Function in the Aged: An Air Filtration-based Intervention Study" by Elvira Vaclavik Bruner, Lykke Forchhammer, Peter Mller, Lars Barregard, Lars Gunnarsen, Alireza Afshari, Peter Whlin, Marianne Glasius, Lars Ove Dragsted, Samar Basu, Ole Raaschou-Nielsen, and Steffen Loft. Published in the "American Journal of Respiratory and Critical Care Medicine," Vol 177. pp. 419-425, (2008).
See also the US EPA web page, "The Inside Story: A Guide to Indoor Air Quality" at http://www.epa.gov/iaq/pubs/insidest.html and their warnings on ozone at http://www.epa.gov/iaq/pubs/ozonegen.html
About the Author
Hiram Perez is a fitness author and life-long martial arts practitioner. Get balanced and commonsense health information at his blog.
0 comments Sunday 30 Nov 2008 | admin | Home Articles
Boost Home Furnace Efficiency And Cut Energy Costs
The snow and cold will be here once again before you know it. So you should be thinking about getting your heating system ready now. If you do it now you will boost your home furnace efficiency and help your heating system last longer too. Here are a few simple steps you can take to cut your heating bills.
There isn’t anything worse than having a cold spell hit and discovering your furnace is either not working or it’s working very inefficiently. You can avoid this unpleasant scenario by taking a few precautions before winter hits. Proper preparation will not only keep your furnace running smoothly it will help to save money on your home heating bills.
Get your furnace ready for winter be taking these simple steps:
1. Have a heating company inspect and clean your furnace
The first thing you should do is to make sure your heating system is in proper working condition. You should hire a qualified heating contractor to check and clean your furnace. This is not expensive and is worth the small expense. Be advised, a furnace that is not running efficiently is going to end up costing you more money to run over the long haul.
Change the furnace filter
If you can afford it, buy a reusable filter for the furnace. A reusable filter can be cleaned over and over again. Standard filters have to be thrown out when they are dirty. Reusable filters will help boost furnace efficiency, which will save you some cash.
Not to mention you will save money not buying new furnace filters several times a year. Be sure to change or clean the filter every month to make sure your furnace is not only working efficiently, but is circulating clean air.
Have the furnace ducts cleaned
Mold, mildew and allergens can accumulate in the heating ducts over the years. Have a duct cleaning contractor thoroughly clean your ducts. This is another sound technique for boosting furnace efficiency making sure your furnace is pumping out clean air for your family to breathe.
Inspect and clean your chimney
Hire a reputable chimney tech to your check and clean your chimney. This will increase furnace efficiency by making sure it can draft sufficiently. A clean chimney will also allow carbon monoxide to escape safely.
These are a few of the simple steps you can follow to get your furnace ready for the cold, winter months. Many homeowners don’t realize it but the best time to have your furnace serviced is in the spring or summer, well before you need to use it.
Many furnace contractors will give you a hefty discount for having service performed before they get busy. This simple technique could save you even more of your hard earned money. By properly preparing your furnace for winter, you can be sure you are getting top-notch furnace efficiency and saving money on your heating bills too.
Donald Marshall is an established online author and business owner with more than 30 years experience in the home energy improvement field. If you would like more energy saving tips, please visit his website, Technology Green.
0 comments Saturday 29 Nov 2008 | admin | Heating
Air Conditioning For Everyone
The term air conditioning refers to the cooling and dehumidification of indoor air for thermal comfort. In a broader sense, the term can refer to any form of cooling, heating, ventilation or disinfection that modifies the condition of air.[1] An air conditioner (AC or A/C in North American English, aircon in British and Australian English) is an appliance, system, or mechanism designed to stabilise the air temperature and humidity within an area (used for cooling as well as heating depending on the air properties at a given time), typically using a refrigeration cycle but sometimes using evaporation, most commonly for comfort cooling in buildings and motor vehicles.
The concept of air conditioning is known to have been applied in Ancient Rome, where aqueduct water was circulated through the walls of certain houses to cool them. Similar techniques in medieval Persia involved the use of cisterns and wind towers to cool buildings during the hot season. Modern air conditioning emerged from advances in chemistry during the 19th century, and the first large-scale electrical air conditioning was invented and used in 1902 by Willis Haviland Carrier.
A poorly maintained air-conditioning system can occasionally promote the growth and spread of microorganisms, such as Legionella pneumophila, the infectious agent responsible for Legionnaires’ disease, or thermophilic actinomycetes,[10] but as long as the air conditioner is kept clean these health hazards can be avoided. Conversely, air conditioning, including filtration, humidification, cooling, disinfection, etc., can be used to provide a clean, safe, hypoallergenic atmosphere in hospital operating rooms and other environments where an appropriate atmosphere is critical to patient safety and well-being. Air conditioning can have a positive effect on sufferers of allergies and asthma.[11]
In serious heat waves, air conditioning can save the lives of the elderly. Some local authorities even set up public cooling centers for the benefit of those without air conditioning at home.
Poorly operating air conditioning systems can generate sound levels that contribute to hearing loss, if exposures are endured over a long term. These levels are similar to the exposure of living near a busy highway or airport for a considerable length of time. Properly functioning air conditioners are much quieter.
A portable air conditioner or portable A/C is an air conditioner on wheels that can be easily transported inside a home or office. They are currently available with capacities of about 6,000 to 60,000 BTU/h (1,800 to 18,000 watts output) and with and without electric resistance heaters. Portable true air conditioners come in two forms, split and hose. Evaporative coolers, sometimes called conditioners, are also portable.
Air Conditioning can be used for home use or industrial use for more information vist Pulse Services Ltd.
0 comments Thursday 27 Nov 2008 | admin | Cooling